植物提取物 中药浸膏专用离心喷雾干燥机

江苏博鸿提供的喷雾干燥机,压力喷雾干燥设备,离心式喷雾干燥机,符合医药GMP/FDA要求。江苏博鸿生产制造的喷雾干燥设备性能稳定,模块化设计,为您提供先进的喷雾干燥整体解决方案和实验喷雾干燥工艺实验样机。江苏博鸿是高品质喷雾干燥设备生产厂家,已提供超数百套高品质喷雾干燥设备,客户遍布全国和欧洲/东南亚/中东等海外地区。

The spray dryer, pressure spray dryer and centrifugal spray dryer provided by jiangsu bohong meet the requirements of GMP/FDA. Jiangsu bohong manufacturing spray drying equipment stable performance, modular design, to provide you with advanced spray drying solutions and experimental spray drying process experimental prototype. Jiangsu bohong is a high quality spray drying equipment manufacturers, has provided more than hundreds of high quality spray drying equipment, customers throughout the country and Europe/southeast Asia/the Middle East and other overseas regions.

一、植物提取物 中药浸膏专用离心喷雾干燥机--设备概述

喷雾干燥机为连续式常压干燥器的一种，用特殊设备将液料喷成雾状，使其与热空气接触而被干燥，用于干燥有些热敏性的液体、悬浮液和粘滞液体，如牛奶、蛋、单宁和药物等。

启动喷雾干燥机开始工作，送风机吸入空气通过空气加热器加热传送到雾化器，雾化器把热的空气转换为热雾气输送到干燥塔内，从扩大口倒入产品到干燥塔内，即可开始干燥产品，启动电机，电机带动旋转桨开始转动，即可使落到旋转桨的产品打散，使其产品干燥的更加均匀，实现了产品进入到干燥塔内干燥效率高的目的，密封塞可为橡胶，密封塞可保护轴承出现卡堵的情况，拉动隔板离开出料口，启动引风机，干燥塔内部的雾气和部分干燥产品被吸入到旋风分离器内，旋风分离器连接有出料口，干燥的产品即可分离从出料口出来，雾气则被第四管道吸入到引风机传送到第五管道内，通过末气除尘器处理后从出气口被流出，即可实现喷雾干燥的目的。

I. Chinese medicine extract spray dryer -- equipment overview

Spray dryer is a continuous atmospheric dryer, with special equipment to spray the liquid into a mist, so that it contact with hot air and dry, used to dry some heat sensitive liquid, suspension and viscous liquid, such as milk, eggs, tannins and drugs.

Start the spray drying machine start working, through the air blower to inhale air heater heat transfer to the atomizer, atomizer the hot mist is converted to heat the air to the drying tower, from expanding into the product in the drying tower, can start drying product, start the motor, the motor drives the rotating blades began to turn, can make into rotating blade product break up, make its products more uniform dry, has realized the product into the drying efficiency, the purpose of drying tower available for rubber sealing plug, bearing seal plug can be protection card wall, pull the diaphragm from discharging mouth, start the induced draft fan, Fog and part of the drying tower internal dry product inhaled in the cyclone separator, cyclone separator connected with discharging mouth, dry products can be separated from the discharging mouth, the fog was the fourth fifth pipe pipe into the induced draft fan, after processing by the end of the air filter was out from the outlet, the purpose of the spray drying can be realized.